Mastering Copper Stripping: A Step-by-Step Guide to Operating the Manual Copper Wire Stripping Machine
The manual copper wire stripping machine is a valuable tool for anyone who works with wires. This compact and efficient machine can help you quickly and accurately strip wires of various sizes.
Setting Up the Machine
Before using the machine, ensure it is properly set up. Connect the air supply hose to a reliable source and plug the machine into a power outlet.
Basic Operation
To operate the machine, use the foot switch to activate the cylinder. This allows you to control the stripping action.
Adjusting the Machine
To adjust the machine for different wire sizes, you can adjust the gap between the upper clamp block and the stripping blade. A wider gap is needed for thicker wires, while a narrower gap is required for thinner wires.
Achieving Precision
Once you have adjusted the gap, you can fine-tune the stripping length and speed using the adjustment screws and regulating valves.
Using a Double-Cutter Model
If you have a double-cutter model, you can cut and strip wires simultaneously. Follow the same calibration steps to optimize its performance.
Maintenance Tips
- Maintain a 1.5mm gap between the cutter and the stripping blade.
- Adjust the gaskets to control the stripping length.
Conclusion
The manual copper wire stripping machine is a versatile and efficient tool for a variety of wire processing tasks. By following these guidelines, you can master its operation and achieve precise results.